Monday, February 11, 2008

02-10-08


Epoxy etching primer on. Still have some little ripples and blemishes. Next weekend, 2k sanding primer and block sanding on the exterior of the bed and top rail.

Saturday, February 9, 2008

02-09-08


Finally - finished blasting the bed and rolled down a coat of POR-15. If it's dry by tomorrow, I'll try to hit the rest of the bed with epoxy primer.

Sunday, February 3, 2008

02-03-08



More of the same - now on the drivers side.
* Removed fender and sanded remaining paint
* Filled holes in sides
* Filled gaps around bed-post holes
* Welded rear seam

More crummy weather, still haven't finished blasting the bed.

Also, have different idea for the final look.
* Light grey (gloss)
* Stock height, wide whites
* Yellow & Red Pinstripes
* Door Logo (maybe?)

Sunday, January 27, 2008

01-27-08


Welded rear seam and filled some ripples and dents on the right rear of the truck. Got a little more blasting done, but it's raining today, so this won't get finished this weekend.

Did some junkyard reconnaissance for look for a potential IFS sub frame swap. Nothing looked right. I'll probably stick with the solid front axle or maybe a Mustang II kit.

Sunday, January 20, 2008

01-19-08

Sandblasting the bed. Hopefully I'll have this nasty job done this weekend. Although I'm being pretty anal about bodywork, I'm NOT going to pound out the dents in the bottom. I figure rhino-liner (or similar) will hide most of them. Besides, I want to use this as a truck when I'm done.

01-10-08

Right side of truck:
* Stripped Paint/Rust from inside fender well
* Filled several holes - Welded and ground
* Welded/ground gaps between bed stake holes and bed sill

01-08-08

Here's the look:
* Caterpillar Yellow
* Lowered 4" front & Back
* Proper truck tires on steel wheels
* Black trim